TFT Touch Screen, kuman 3.5 inch 320×480 Resolution TFT LCD Display with Protective Case + 3 x Heat sinks+ Touch Pen for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ SC11

By September 13, 2017iot, machinelearning

3.5inch LCD panel description
Designed for Raspberry Pi, an ideal alternative solution for monitor
Supports any revision of Raspberry Pi (directly-pluggable)
Driver provided (works with custom Raspbian directly)
320×480 resolution, better display
Take photos by touch pen (up to 17 camera modes)
Support software keyboard (system interaction without keyboard/mouse)

Key Parameters
LCD Interface: SPI
LCD Type: TFT
Backlight: LED
Colors: 65536
Aspect Ratio : 8:5
Resolution: 320*480 DOTS
Power Consumption: TBD
Backlight Current: TBD

Protection Case with 3x Heat sinks
Designed SPECIALLY for Raspberry Pi 3 Model B; Full access to all controls and features
The protective case consists of five-piece PMMA enclosure that snaps together around Raspberry Pi 3 Model B,Provides the best available protection/accessibility for Model B,Protect and secure your Raspberry Pi from shocks, scratches and dust

Package Contains
1x 3.5inch Touch Screen LCD for Raspberry Pi (all versions)
1x Touch pen
1x Protection Case
3x Heat sinks
1x CD instruction

Note:
Raspberry Pi 3 Model B NOT Included
We have tutorials and software for you to download, please contact us by email to get all information.

You want to use the gpio pins of the raspberry motherboard to plug 3.5inch LCD panel and other components at the same time? Recommend Kuman K80 GPIO Breakout Expansion Kit ASIN:B074DSMPYD3.5 inch resistive touch screen Module SPI Interface for Raspberry Pi 2 3 B/B+/A+ /A/B, 320*480 resolution, better display. Upgraded for Raspberry Pi B+; No external power supply needed
Software package contains everything you need to start from ground zero. Compatible with Raspberry Pi 3 B RPi 2B/B+/A+ /A/B,Raspberry Pi not included
Pi 3 Model B case, 2016 Update Better RPI 3 case – High quality PC Protective Case with 3x Heat sinks for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+
Please note that you need to install our jessie OS with the pre-installed drives on a new or format SD card, if you dont install our jessic OS with the pre-installed drives, you will be starting at a white LCD panel. We have do test on OS, if you want to use other system, maybe you need to add drivers by yourself.
Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.

$29.99